805BS Digital Weight Indicator

The ANYLOAD 805BS digital weight indicator is a general purpose indicator that provides high accuracy and reliability with multiple functions. The 805BS has an A/D adopted conversion technology of a 24-bit microprocessor with a rate of conversion of 200 cycles per second and can drive up to eight 350Ω or sixteen 700Ω load cells through a junction box. With a SS304 stainless steel wash down enclosure, the 805BS ANYLOAD digital weighing indicator is ideal for the food industry, agricultural industry, and industrial applications and is NTEP III/IIIL, 10000 and Measurement Canada III, 10000; III HD 20000 approved.

NTEP III/IIIL, 10 000 approved
Measurement Canada III, 10 000; III HD 20 000
Material: Stainless steel SS304
IP Rating: IP66
LCD 6-digit display
Power Supply: External AC adaptor or rechargeable lithium batteries 7.4V/4000mA
Parameter and calibration settings are performed on the front panel
Units of Measurement: kg, lb, g, oz, lb:oz conversion
Improper operation and fault indication
Two way relay signal output
Equipped with RS-232 and RS-485 connecting ports
Print functions with programmable print format
Serial print interface
Built-in clock
Functions:Auto Zero Scale, Auto Zero Tracking, PEAK, COUNT, Zero Scale, TARE, GROSS/NET
Password Function to provide easy method in adjusting the parameter settings without opening the back panel. Applicable only if legal for trade is not required

	805BS-B-H (discontinued)	805BS-B-17 (discontinued)	805BS-TN-B (discontinued)	805BS-B-19
Enclosure Material	Stainless steel SS304		Stainless steel SS201	Stainless steel SS304
Units of Measurement	kg, lb, g, oz, lb:oz conversion
Working Humidity	≤90% RH
Working Temperature	-10°C to 40°C/14°F to 104°F
Dimensions (mm)	226mm x 71mm x 161mm	226mm x 76mm x 181mm
Dimensions (in)	8.9in x 2.8in x 6.34in	8.9in x 3.0in x 7.13in
Display Type	LCD
Display Digits	6 digits
Digit Height	25.4mm/1in
Display Dimensions	143mm x 41mm/5.6in x 1.6in
Power Supply	colspan=”4″>AC adaptor, 100-240VAC, 12VDC 2.5A, 50-60Hz (Two pieces, 1st piece from 3 pin wall socket to adaptor, 2nd piece from adaptor to indicator)	External AC linear adaptor, 100-240VAC, 12VDC 400mA, 50-60Hz (One piece, 2 pin wall adaptor, single power cord from wall socket to indicator) and Rechargeable Lithium Battery 7.4V/4000mA	External Desktop type Power Supply, 100-240VAC, 12VDC 2000mA, 50-60Hz (Two pieces, 1st piece from 3 pin wall socket to adaptor, 2nd piece from adaptor to indicator) and Rechargeable Lithium Battery 7.4V/4000mA. See details here
IP Rating	IP66

	805BS-B-H (discontinued)	805BS-B-17 (discontinued)	805BS-TN-B (discontinued)	805BS-B-19
Division	1, 2, 5, 10
Tare Range	100% Full Scale
Maximum Number of Load Cells	8×350Ω or 16×700Ω (through a junction box)
Maximum Power Consumption	10W
Excitation Voltage	5VDC ± 5%
Fusible Link Fuse (slow blow)	1.1A
Communications Interface	RS-232 and RS-485		RS-232 only	RS-232 and RS-485
Backlight Display	Manual	Always ON / Always OFF / Auto-off (10 sec to 60 sec)	Auto-off after 10 sec.	Always ON / Always OFF / Auto-off (10 sec to 60 sec)
Input Range	Up to 20mV
Update Rate (Display Rate)	Options from 250ms to 1sec	20ms or 50Hz
Print Interface	Serial interface

Features	805BS-B-H (discontinued)	805BS-TN-B (discontinued)	805BS-B-19
Auto Zero Scale	Auto and Manual Zero Scale
Auto Zero Tracking
Normal Weighing
Peak		Peak Mode is not equipped	Peak
Counting
Zero Scale
Tare
Gross / Net
Alarm when load exceeds the maximum load capacity of the scale or load cell
N/A	Password to provide easy method in adjusting the parameter settings without opening the back panel. Only if legal for trade is not required
RS-232 and RS-485		RS-232 only	RS-232 and RS-485
Two-way relay signal output		Relay function is not equipped	Two-way relay signal output
Print Interface (PS805)
No Labrador software support