DGB-A Digiboard, Amplificador analógico
Características:
-
- One input port, can connect directly to 1×350Ω load cell @ 12 V DC power, or 2×350Ω load cells @ 24 V DC power
- Input range: 0.2 – 10.0 mV/V
- Reverse polarity protection
- The chip is 24.6mm in diameter and can be embedded within load cells, making the load cells have built-in analog signal amplification
- Software is used for calibration
- DGB-A Chips can be embedded into load cells for built-in analog signal amplification (special order required)
- Designed for all strain gauge sensors including tension, compression, torque, and pressure load cells.
- PC Software available for calibration, operations, and data acquisition.
| Load Cell Type | All strain gage type |
| Power Supply and Consumption | 12-24 V DC |
| Input Range | 0.2-10.0 mV/V |
| Temperatura de trabajo | -22°F – 122°F / -30°C – 50°C |
| Excitation Voltage to Load Cell | 5 V DC |
| No linealidad | ≤0.02% |
| No linealidad | ≤100ppm/ °C |
| Output Signal | 0 – 20 mA; 4 – 20 mA (DGB-AI2508); 0 – 5 V DC; 0 – 10 V DC; -5 – 5 V DC (DGB-AV2508) |
English 
Korean 
French 
Spanish