The ANYLOAD 102DS is a 17-4PH stainless steel double ended beam load cell designed for precision weight and force measurement. It is offered in twelve rated capacities from 5Klb to 200Klb, with a full scale output of 3.0 mV/V and a tightly controlled zero balance. Nonlinearity, hysteresis, and creep are each held below ±0.023%, with repeatability tighter still. Engineers, OEM designers, and system integrators who need a sealed stainless steel load cell will find the 102DS well suited to their designs. The welded construction carries an IP68 seal rating, with a safe overload of 150% and a breaking overload of 300% of full scale.
The datasheet gives a full dimensional drawing and table in both inches and millimeters, covering overall length, height, mounting hole spacing, and NPT thread sizes (1/4-18 NPT on the 5 to 20Klb ratings and 1/2-14 NPT on the 30 to 200Klb ratings), plus approximate weight for each capacity. The standard cable follows the color code Exc+ red, Exc- black, Sig+ green, Sig- white, and bare shield, with cable diameter and length specified by capacity range. Key electrical and environmental specs are also documented, including 700 ohm input and output resistance, 10V recommended excitation (15V maximum), and a compensated temperature range of -10°C to 50°C (14°F to 122°F). Everything needed to specify, wire, and mount the 102DS is in one place, without guesswork.
The 102DS is RoHS compliant, and ATEX, FM, and IECEx approved versions are available under the “-Ex” suffix. An interchangeability reference table cross-references equivalent models from Artech, Coti Global, Mettler Toledo, Rice Lake, and Vishay Revere Transducers. Dealers, service technicians, and procurement teams can use it to find a direct ANYLOAD replacement quickly. The related 102DSM3 weigh module is also referenced for complete mounting solutions.
English 
Korean 
French 
Spanish