Vehicle Weighing Solutions | Anyload
Reliable vehicle weighing starts with accurate load measurement at the point where vehicles enter, exit, load, or transfer material. Truck scales, weighbridges, axle scales, and portable axle weigh pads are used to verify gross vehicle weight, axle group loading, tare weight, payload, and compliance with site or highway limits. For engineers and facility owners, the right vehicle scale supports traffic flow, civil foundation design, data capture, overload prevention, and operational control.
ANYLOAD supplies vehicle weighing systems for heavy transport, industrial, agricultural, construction, waste, aggregate, and logistics applications. Our product range includes truck scales, weighbridges, axle scales, axle weigh pads, and weigh-in-motion systems for fixed and portable weighing operations. Each system is supported by ANYLOAD load cells, junction boxes, indicators, and weighing electronics, with legal-for-trade options available for approved scale configurations and certified weighing components in Canada, the United States, and globally.
Truck Scales
ANYLOAD truck scales are full-length weighbridges engineered for the demands of North American commerce, from steel-deck platforms to pit and pitless configurations.
Weigh-In-Motion
ANYLOAD weigh-in-motion (WIM) systems capture axle and gross vehicle weights as trucks roll across the platform, eliminating the stop-and-weigh bottleneck at high-traffic sites. Designed for screening, sorting, and overweight pre-detection.
Axle Scales
ANYLOAD axle scales are durable, full-width platforms designed to weigh trucks one axle or axle group at a time, making them an economical alternative to a full-length weighbridge where space or budget is limited.
Weighbridge Truck Scales
Industrial transport operations, municipal waste stations, mining quarries, and bulk agricultural hubs operate under a common operational challenge: capturing accurate, legal-for-trade vehicle weights under grueling conditions. System downtime halts dispatch cycles and directly compromises profitability. A permanent weighbridge represents the core structural investment of a facility. To prevent structural fatigue, platform sagging, and micro-cracking over decades of continuous wheel loads, a weighbridge must be built with a high-stiffness steel platform and a self-centering suspension system. Selecting between a premium high-throughput scale and a modular, value-engineered global system allows operational managers to align capital investments with exact environmental and shipping constraints.
ORCA 트럭 스케일
The ORCA™ is our premium steel deck truck scale engineered for high-throughput logistics, mining, and aggregate facilities operating in harsh climates. Its robust closed-rib structure eliminates structural flexing and dynamic plate twisting, protecting load cell calibration to ensure decades of reliable weighing service.
ORCA 주요 기능
- Self-Aligning Weigh Modules: Equipped with NTEP-certified ANYLOAD 102BH double ended beam cells in 102BHM1 suspension-link mounts that absorb multi-directional movement without check rods
- Torsion Box Structural Stiffness: Continuous welded orthotropic U-channel deck reinforced with a fully welded bottom plate
- Boltless H-Bracket Connectors: Drop-in sectional connectors align modules naturally, allowing for thermal expansion without shearing
- Top-Access Service Pockets: Convenient above-deck serviceability for fast load cell maintenance without lifting the platform
OTTER 트럭 스케일
The OTTER™ is a value-engineered modular truck scale designed to deliver dependable weighing performance in general B2B industrial applications. Its lightweight yet highly rigid orthotropic frame makes it the ideal, cost-effective solution for agricultural operations, temporary construction yards, and remote logistics terminals.
OTTER 주요 기능
- Containerized Modular Design: Fully pre-assembled scale sections flat-pack globally to dramatically reduce ocean and rail freight logistics costs
- Hydraulically Pre-Cambered Modules: Built with a pre-stressed upward curve to resist mid-span deflection and prevent long-term metal fatigue
- Heavy-Duty Structural Capacity: Certified for a 40 t Concentrated Load Capacity (CLC) and 40 t Dual Tandem Axle (DTA) limits
- Rocker Column Canister Load Cells: Employs OIML C3-certified stainless steel ANYLOAD 106HS cells with integrated anti-rotation guards
Weigh-In-Motion Scales
AXA-8 Axle Weigh Pad
The AXA-8 is a high-capacity, portable wheel weighing pad engineered for mobile transport screening and dynamic fleet compliance checks. Built on a lightweight 19 kg (42 lb) hammer-tone aluminum chassis for rapid, single-operator deployment, it features a recessed 6-digit backlit LCD screen protected by a heavy polycarbonate cover to survive direct wheel rollovers.
AXA 주요 기능
- Dynamic Weigh-In-Motion (WIM): Automatically captures accurate vehicle single-axle weights at rolling speeds up to 10 kph (6 mph) to eliminate bottleneck stop-and-go delays
- IP68 Weatherproof Protection: Industry-leading NEMA 6P dust- and moisture-sealed enclosure with raised capacitive touch switches for dependable, all-weather operations
- 600-Hour Wireless Autonomy: Operates continuously in the field using rechargeable, tool-free replaceable standard 18650 Li-ion cells
그리고 AXA-8 dynamic axle weighing system streamlines high-volume B2B vehicle screening by keeping logistics and fleet vehicles in motion. Traditional static weighing processes require trucks to queue, come to a complete stop, and stabilize before recording weights—causing bottlenecks at busy logistics gates and distribution centers. By deploying a paired set of AXA-8 axle pads, along with polyurethane dummy ramps and 3.3-meter (11-foot) AXA-8-EXT-30 extension pads to level the vehicle’s axles, fleet operators can capture accurate weights while the vehicle is in motion. This dynamic screening system processes vehicles at rolling speeds of up to 10 kph (6 mph), yielding a dynamic metrological accuracy range of ± 1% to ± 3%.
This continuous process minimizes vehicle wear, eliminates truck queuing, and reduces idle emissions to support facility sustainability goals. Data is transmitted wirelessly over secure 128-bit AES-encrypted Zigbee channels to the AN560 휴대용 무선 표시기. The AN560 operates as the metrological “brain” of the field setup, allowing operators to simultaneously connect up to 8 pads to evaluate weight distribution and check for single or dual tandem axle violations. The AN560 is housed in an IP67-rated rugged hard-shell case and features an outdoor-readable, high-contrast 4.2-inch E-Ink display. An integrated direct-line thermal printer allows field operators to print immediate, timestamped receipts containing gross, tare, net, and per-axle weight data for overload enforcement, billing reconciliation, or inventory records.
Axle Scales
ORCA-AXL Axle Scale
The ORCA-AXL is a high-performance mild steel platform engineered for semi-permanent vehicle axle weighing. Built for maximum structural integrity, it features an orthotropic U-channel deck configuration and dual lateral cross-bracing, providing superior rigidity and fatigue resistance under constant, heavy-duty cycling.
ORCA-AXL 주요 기능
- Flexible Footprint: Available in 10′ or 11′ widths and lengths ranging from 10′ to 20′ to suit diverse site layouts
- Maintenance-First Design: Features a top-access configuration with boltless service covers. Technicians can perform inspections, cleanouts, and load cell servicing directly from above—eliminating the need for specialized lifting equipment or platform removal
- Built for Durability: Optimized for long-term reliability in demanding industrial environments
그리고 ORCA-AXL Axle Scale is an economical solution for monitoring fleet load balance and avoiding highway axle-load violations. It is well suited for industries such as forestry, mining, agriculture, and construction, where vehicles must transition directly from unimproved soils onto public highways. Operating a heavy transport fleet with unbalanced axles can cause early suspension wear, reduce braking safety, and risk heavy municipal fines for exceeding single-axle or dual-tandem limits. By placing the ORCA-AXL along facility egress paths, operators can measure axle loads in a single pass to ensure compliance before vehicles depart.
Constructed in single or dual-section configurations, the ORCA-AXL utilizes ANYLOAD 102BH double-ended shear beam load cells (25Klb rated capacity each) to deliver precise, repeatable weight readings. Individual scale segments are connected using boltless H-bracket joints, simplifying field assembly and allowing the platform to adjust to site thermal expansion. To expand protection, the ORCA-AXL can be upgraded with a hot-dip galvanized finish for wet or corrosive conditions, stainless steel load cells, and a steel conduit cable armor kit to prevent rodent damage in remote locations.
Vehicle Scale Resources
Everything you need to specify, install, calibrate, and maintain an ANYLOAD vehicle scale is gathered here. The resources below cover our full range of truck scales, axle scales, and axle weighing equipment, from application guides and technical documentation to legal-for-trade certifications and online weighing tools.
Guides and Application Notes
Our truck scale guides walk through how vehicle scales work and how to choose the right one for your site. The Truck Scales Introduction covers scale types, applications, and the anatomy of a weighbridge, while the Design & Fabrication guide explains how structural design and materials differentiate truck scale manufacturers, and the Integration guide details installation, calibration, and ongoing maintenance for system integrators. When field performance falls short of specification, the weighing systems troubleshooting guide diagnoses the most common issues by symptom.
Datasheets, Manuals and Drawings
그리고 scale manuals and drawings library holds installation manuals, datasheets, and dimensional drawings for the full ORCA and OTTER range. For planning a new installation or retrofitting an existing one, the existing foundation worksheet 및 truck scale configuration worksheet capture the site dimensions and options needed for an accurate quotation. CAD and .STEP files are available on request for design engineers and planners.
Certifications and Approvals
ANYLOAD vehicle scales are built for legal-for-trade use and supported by recognized weights-and-measures approvals. See the 캐나다 측정 approval for legal-for-trade use in Canada, and the NTEP 및 OIML certifications covering the load cells used in our truck and axle scales. For hazardous-area installations, our scales can be supplied with FM, ATEX및 IECEx certified components. A full list of certifications is available on the approvals page.
Tools and Support
Several online tools speed up scale selection and everyday weighing work, including the weight conversion tool, the length conversion tool, and the weighing 용어집 for terminology. To compare or cross-reference parts, use the interchangeable search tool. When you’re ready to request a quote, arrange installation, or get service, find a local dealer 또는 contact ANYLOAD directly.
English 
Korean 
French 
Spanish