101RSLS Célula de carga S-Beam
The ANYLOAD 101RSLS S-Beam Load Cell is a miniature stainless steel force transducer designed for high-precision tension and compression measurement in low-capacity applications. Manufactured from durable 17-4PH stainless steel and environmentally sealed to IP66, the sensor delivers stable and repeatable performance in demanding laboratory, instrumentation, and industrial environments. The 101RSLS is available in very low force capacities, making it suitable for precision force measurement tasks where compact size and high sensitivity are critical.
Miniature S-beam load cells such as the 101RSLS are widely used in test and measurement systems, precision laboratory equipment, robotics development, and small-scale automation systems where accurate bidirectional force measurement is required. The symmetric S-beam design allows the sensor to measure both tension and compression forces along a single axis, while threaded mounting points enable straightforward integration into test fixtures, calibration rigs, materials testing equipment, and mechanical assemblies. This configuration is commonly used in product development testing, actuator characterization, and precision force monitoring applications.
Engineered for OEM integration and instrumentation platforms, the 101RSLS provides a reliable sensing element for force monitoring, validation testing, and R&D measurement systems. Typical applications include robotic actuator testing, small motor characterization, component force verification, and laboratory experimentation where low-capacity force measurement must be performed with high accuracy and repeatability. When paired with signal conditioning electronics, amplifiers, or data acquisition systems, the sensor can be integrated into complete force measurement and data acquisition platforms used for engineering research and manufacturing quality control.
If your application requires specialized integration or a tailored sensor configuration, ANYLOAD can assist with customization and engineering consultation. Our team works with OEM manufacturers, robotics developers, and test equipment integrators to adapt force sensors for unique mounting requirements, capacity ranges, environmental conditions, and electrical interfaces. Contact us to discuss your application or to develop a customized force measurement solution designed for your equipment or testing system.
Características
- Material: Acero inoxidable
- Rated Capacities: 0.25lb, 0.5lb, 1lb, 2lb, 3lb, 10lb, 25lb, 50lb, 100lb
- Full Scale Output: 1.0mV/V ± 20%(0.25-0.5lb); 2.0mV/V ± 0.20%(1-100lb)
- Safe Overload: 1800% of full scale (0.25-0.5lb); 1000% of full scale (1-25lb); 200% of full scale (50-100lb) for tension only
- IP Rating: IP40
Especificaciones
| Capacidades nominales | 0.25lb, 0.5lb, 1lb, 2lb, 3lb, 10lb, 25lb, 50lb, 100lb |
|---|---|
| Salida a fondo de escala | 1.0mV/V ± 20%(0.25-0.5lb); 2.0mV/V ± 0.20%(1-100lb) |
| Saldo cero | < ± 0.02mV/V |
| No linealidad | < ± 0.1% |
| Repetibilidad | < ± 0.05% |
| Error de histéresis | < ± 0.1% |
| Creep en 30 minutos | < ± 0.1% |
| Resistencia de entrada | 350Ω ±10Ω |
| Resistencia de salida | 350Ω ± 5Ω |
| Excitación recomendada | 5V (10V Max) |
| Resistencia del aislamiento | >2 [50V CC] GΩ | Temperatura nominal | –10°C to 50°C/-14°F to 122°F |
| Sobrecarga segura | 1800% of full scale (0.25-0.5lb); 1000% of full scale (1-25lb); 200% of full scale (50-100lb) for tension only |
| Tipo de junta | Environmentally Sealed |
| Clasificación IP | IP40 |
English 
Korean 
French 
Spanish