The ANYLOAD 101AALS/101ASLS is a clear anodized aluminum and 17-4PH stainless steel load cell series designed for tension and compression force measurement. The aluminum 101AALS covers capacities from 2.2lb to 100lb, and the stainless steel 101ASLS covers 200lb, 300lb, and 500lb . Every model delivers a rated output of 2 mV/V. Nonlinearity and hysteresis are held to within 0.02% on the aluminum models and 0.06% on the stainless models, and repeatability and 30-minute creep are both tightly controlled. Engineers and OEM designers get consistent, repeatable force data from a compact package. The cell carries an IP30 rating, and safe overload ratings range from 100lb on the smallest models up to 750lb on the 500lb model.
Mounting uses threaded holes: #10-32 UNF on models up to 200lb and 1/4-28 UNF on the 300lb and 500lb models. The datasheet includes a dimensional drawing with tables in both inches/pounds and millimeters/kilograms. Wiring follows a clear color code: Exc+ green, Exc- black, Sig+ white, and Sig- red. The standard cable is 4-conductor #28 AWG, 11.8 inches (300 mm) long. The datasheet also lists input resistance (1050 Ω), output resistance (1000 Ω), recommended excitation (10 V, 15 V maximum), and nominal temperature ranges of -10°C to 40°C for aluminum and -10°C to 50°C for stainless steel. The part number table adds safe overload, deflection, and approximate weight for each capacity, so you can specify and install the right model without guesswork.
The 101AALS and 101ASLS are RoHS compliant. ATEX, FM, and IECEx approved versions are available by adding the “-Ex” suffix to the part number, so the same load cell family can serve both standard and approved-area requirements.
English 
Korean 
French 
Spanish