메인 메뉴

Multi-Axis Hitch Force Sensing for Powered Trailers

Smart Kingpin Force Measurement for Electric Trailer Propulsion

Battery-powered and hybrid-electric trailers use onboard motors to provide propulsion assistance during acceleration and climbing, while regenerative braking can recover energy during deceleration. To coordinate these functions with the tow vehicle, the trailer control system requires continuous information about the forces being transferred through the tractor-trailer connection.

For heavy duty or semi truck applications, ANYLOAD transformed the trailer kingpin itself into a multi-axis force sensor. Measuring force directly at the coupling provides real-time feedback for propulsion assist, regenerative braking, traction control, load monitoring, and vehicle dynamics without adding a separate sensor assembly.

도전 과제

  1. Safety-Critical Structural Component: The kingpin remains responsible for mechanically securing the trailer to the tractor. Adding sensing features, strain gauges, wiring, and electronics cannot compromise its strength, fatigue life, or coupling geometry.
  2. Multi-Axis Force Measurement: The towing force must be distinguished from vertical and lateral forces generated by trailer weight, cornering, articulation, and crosswinds. Sensor geometry must provide useful sensitivity while minimizing cross-talk between channels.
  3. Continuous Dynamic Loading: The kingpin experiences vibration, shock, changing load direction, acceleration, braking, and repeated road cycles. Both structural integrity and signal performance must remain stable throughout the expected service life.
  4. Vehicle Controls Integration: Force data must be delivered reliably to the trailer’s control system with the correct communication protocol, update rate, scaling, diagnostics, and fault behavior.

솔루션

  1. Instrumented Multi-Axis Kingpin: Strain gauges and optimized sensing features were integrated directly into the kingpin, allowing the structural component to measure multiple force axes while retaining its normal mechanical function.
  2. FEA and Fatigue Validation: Finite element analysis (FEA) was used to optimize strain locations, improve sensitivity, reduce cross-talk, and identify stress concentrations. Design iterations addressed structural durability and measurement performance, with validation focused on maintaining mechanical integrity and reliable force measurement under repeated dynamic loading.
  3. CAN Bus Digital Integration: ANYLOAD developed a digital CAN bus output to interface directly with the trailer’s command and vehicle-control systems. Integration required hardware development, communications configuration, software troubleshooting, signal verification, and coordination between the sensor electronics and customer control architecture.
  4. Real-Time Propulsion Feedback: Calibrated force data provides the control system with a direct measurement of the interaction between tractor and trailer. This can support propulsion assistance, regenerative braking, drive torque control, traction and stability strategies, and intelligent energy management.

결론

A force-sensing kingpin turns an existing safety-critical trailer component into a real-time vehicle dynamics sensor. Multi-axis measurement, FEA-driven structural development, fatigue validation, CAN bus integration, and coordinated hardware and software engineering provide powered trailer manufacturers with the force feedback required for responsive and efficient electric propulsion systems.

문의 제출

키워드:
Force Sensing Kingpin, Smart Kingpin Sensor, Powered Trailer Force Sensor, Electric Trailer Sensor, Truck Trailer Sensor, Multi-Axis Hitch Sensor, Trailer Propulsion Assist, Regenerative Braking Sensor, Drive Torque Control, CAN Bus Load Cell, CAN Bus Force Sensor, Hybrid Electric Trailer

주요 제품

커스텀
Multi-Axis Force Sensor
표준 버전을 참조하세요.

Fully custom force sensor’s for unique applications.

  • Miniaturization
  • Multi-Axis Sensing
  • Testing & Validation
  • High Precision
  • Extreme Environmental Resistance

사례 연구 살펴보기

Garbage Truck Bin 무게 측정

Modern refuse collection vehicles increasingly use onboard weighing to measure the contents of individual waste and recycling containers during collection. A load cell is integrated into the lifting arm allows each bin to be weighed as it is raised and emptied, providing weight data without adding a separate weighing step to the collection route.

도로 라인 페인팅 차량 무게 측정

라인 페인팅 차량은 도로와 고속도로에서 일관된 표시를 통해 교통 안전을 유지하는 데 중요한 역할을 합니다. 특히 동적인 환경에서 작업 중 일관된 라인 밀도를 보장하려면 페인트 사용량을 모니터링하는 것이 중요합니다. 이 문제를 해결하기 위해 ANYLOAD 563YH 싱글 엔드 전단 빔 로드셀이 이동식 페인트 스트리퍼에 통합되어 작동 중에 장착된 페인트 드럼의 실중량을 추적합니다.

Ammonia Tank 무게 측정

Agricultural ammonia (NH₃) tank wagons transport thousands of liters of liquid fertilizer that must be weighed accurately throughout filling, transportation, storage, and field application. A load cell-based weighing system provides operators with continuous weight monitoring to improve inventory management, prevent overfilling, reduce product waste, and ensure safe handling in demanding outdoor agricultural environments.

맨 위로 스크롤