메인 메뉴

EMS Stretcher Load Measurement

Integrated Weight and Load Sensing for Ambulance Cots

Powered ambulance cots and EMS stretchers must lift, lower, support, and transport patients under demanding field conditions. Integrated load sensing can provide patient weight information for clinical documentation, weight-based treatment decisions, bariatric transport planning, and equipment load management. The same sensor data may also support powered lift control, overload detection, and system diagnostics.

Unlike a stationary medical scale, an ambulance cot has a folding frame, changing geometry, powered actuators, accessories, restraints, and moving mechanical joints. Reliable measurement therefore depends on integrating the sensor into a defined structural load path.

도전 과제

  1. Complex Structural Load Paths: Patient weight passes through the litter, articulated frame, pivots, cross members, actuator, and wheel base. Frame position, accessory loads, friction, and mechanical binding can change how force reaches the sensor.
  2. Dynamic Field Conditions: Ambulance cots experience vibration, curb impacts, repeated lift cycles, uneven surfaces, cleaning, temperature changes, and off-centre patient loading. The system must distinguish a stable patient-weight reading from transient transport forces.
  3. Compact and Lightweight Integration: The load-sensing component must fit within the existing frame geometry without restricting folding, changing cot height, adding unnecessary mass, or interfering with powered lift and vehicle-loading functions.
  4. Medical Equipment Reliability: Sensors and cables must tolerate repeated articulation, shock loading, overload, and long service intervals while meeting medical device OEM requirements for traceability and controlled change management.

솔루션

  1. Application-Specific Engineering: A compact single-ended beam, instrumented cross tube can replace an existing load-bearing component within the cot frame to provide direct force measurement without a separate weighing platform. ANYLOAD works with the manufacturer to evaluate load paths, pivot geometry, actuator forces, frame deflection, accessory loads, and operating positions, using finite element analysis, prototype testing, and full-system calibration to ensure consistent real-world performance.
  2. Dynamic Measurement and Controls Integration: Mechanical overload capacity, signal filtering, motion detection, tare logic, and stable-weight criteria can be developed around the cot’s electronics and control strategy. Customized cables, flexible strain relief, connectors, and pin assignments simplify routing through articulated frame sections.
  3. ISO 13485 & Scalable OEM Manufacturing: ANYLOAD supports prototypes, verification builds, pilot production, and high-volume manufacturing under an ISO 13485-certified quality management system. Controlled strain gauging, compensation, calibration, inspection, traceability, and engineering changes support long-term medical equipment programs.

결론

An instrumented structural member allows ambulance cot manufacturers to integrate patient weighing and load monitoring directly into the powered frame. Careful load-path analysis, customized mechanical design, dynamic testing, reliable cable routing, and ISO 13485 manufacturing are essential for dependable performance throughout real EMS operations.

문의 제출

키워드:
Emergency Medical Services, Ambulance Cot Load Cell, EMS Stretcher Scale, Powered Cot Weight Sensor, Integrated Patient Weighing, Medical Equipment Load Cell, Single-Ended Beam Load Cell, Onboard Patient Weighing

주요 제품

커스텀
싱글 엔드 로드셀
표준 버전을 참조하세요.

ANYLOAD can develop a compact single-ended beam load cell or instrumented cross member based on the cot manufacturer’s frame, pivot, and actuator geometry. The sensing element can be manufactured from high-strength aluminum to reduce weight while providing the stiffness, output, fatigue resistance, and overload performance required for repeated powered lifting cycles.

The sensor can incorporate application-specific mounting points, bearings, cable exits, connectors, strain relief, output characteristics, and calibration. Its mechanical form may replace an existing cross tube, pivot member, or actuator interface, reducing the number of added components and placing the measurement directly within the primary load path.

 

사례 연구 살펴보기

Humanoid Robotic Joint 로드셀

A robotics team set out to improve how humanoid robots control force and interact safely with people. To achieve this, they focused on better understanding axial forces within linear motors used as joints. ANYLOAD’s 247BSWM load button was well-suited to this application, integrating directly at the end of the joint drive or within the lead screw.

힘 측정 for Bone Density Training

In strength and rehabilitation training, precise data is captured to measure and quantify performance while helping professionals guide performance goals. Designed to directly measure isometric muscle force, a small form factor button load cell is installed into the frame of the bone density system to provide real-time accurate force readings without affecting the main functions and movements of the machine.

터치스크린 햅틱 힘 센서

스마트폰과 스마트워치의 광범위한 사용과 디스플레이 기술의 급속한 발전으로 스마트폰 LCD 화면의 품질은 소비자의 주요 관심사가 되었습니다. LCD 화면의 제조 공정은 복잡하고 정밀하기 때문에 밝은 부분, 어두운 부분, 색상 편차, 빛 누출과 같은 다양한 결함이 발생하기 쉽습니다. 이러한 결함은 제품 디스플레이 품질에 심각한 영향을 미칩니다.

맨 위로 스크롤