102EH Capteur de pesage à double extrémité

The ANYLOAD 102EH is a nickel-plated alloy steel double ended beam load cell designed for center-loaded force measurement in silo, tank, and hopper weighing. It is available in 16 rated capacities from 1Klb to 300Klb, with a full scale output of 3.0 mV/V and a tightly controlled zero balance. Nonlinearity, hysteresis, repeatability, and 30-minute creep are all held to within one-tenth of one percent of full scale or better, giving engineers and OEM designers dependable, repeatable performance in vessel weighing systems. The environmentally sealed construction carries an IP67 rating, and every capacity is rated for a 150% safe overload and a 300% breaking overload.

Installation is straightforward, with a full dimensional drawing and tables covering width, height, length, mounting dimensions, and NPT thread sizes (1/4-18 NPT or 1/2-14 NPT depending on capacity), along with approximate weights from 1.7 kg to 50 kg. The datasheet documents the key electrical and environmental specifications, including 700 ohm input and output resistance, 10 V recommended excitation (15 V maximum), a compensated temperature range of -10°C to 50°C (14°F to 122°F), and insulation resistance above 2 GΩ. Standard cable is 5.1 × 10 m on capacities up to 35Klb and 7.6 × 18 m on 50Klb and above, wired to a clear color code: red excitation positive, black excitation negative, green signal positive, white signal negative, and a bare shield. The ANYLOAD 102EHM2 compression weigh module is also available as a mounting solution. With every dimension, specification, and wiring detail in one place, you can design, install, and wire the 102EH without guesswork.

The 102EH is RoHS compliant, CE and Ex (NEPSI) certified, with ATEX, FM, and IECEx approved versions available under the -Ex suffix. The datasheet also includes an interchangeable reference table that cross-references equivalent models from Artech, Coti Global, Rice Lake, Mettler Toledo, Vishay Celtron, Vishay Revere Transducers, and Vishay Sensortronics. This helps dealers, service technicians, and procurement teams quickly find a direct ANYLOAD replacement.

En savoir plus

- +

Caractéristiques

  • Rated Capacities: 1Klb, 1.5Klb, 2.5Klb, 5Klb, 10Klb, 15Klb, 20Klb, 25Klb, 35Klb, 50Klb, 60Klb, 75Klb,100Klb, 125Klb, 200Klb, 300Klb
  • Matériau : Acier allié
  • Sortie pleine échelle : 3mV/V ± 0,25%
  • Surcharge sûre : 150%
  • Surcharge de rupture : 300%
  • Indice de protection IP : IP67
  • Certifié CE, RoHS et Ex(NEPSI)
  • ATEX, FM, IECEx disponibles sur demande

Spécifications

Capacités nominales 1Klb, 1.5Klb, 2.5Klb, 5Klb, 10Klb, 15Klb, 20Klb, 25Klb, 35Klb, 50Klb, 60Klb, 75Klb, 100Klb, 125Klb, 200Klb, 300Klb
Sortie pleine échelle 3.0mV/V ± 0.25%
Solde zéro ± 0,02mV/V
Non-linéarité ≤ 125Klb < ± 0.050% // ≥ 200Klb < ± 0,1%
Répétabilité < ± 0,030%
Erreur d'hystérésis ≤ 125Klb < ± 0.030% // ≥ 200Klb < ± 0,1%
La reptation en 30 minutes < ± 0,030%
Résistance d'entrée 700Ω ± 10Ω
Résistance de sortie 700Ω ± 5Ω
Excitation recommandée 10V (15V maximum)
Résistance de l'isolation > 2GΩ (50V DC)
Plage de température compensée –10°C to 50°C/14°F to 122°F
Surcharge sûre 150% de la pleine échelle
Rompre la surcharge 300% de la pleine échelle
Type de joint Environmentally Sealed
Indice de protection IP IP67

Interchangeable

Artech 70510
Coti Global CG-16
Lac Rice RL75016
Lac Rice RL77032
Mettler Toledo SLD425
Vishay Celtron DSR
Transducteurs Vishay Revere 5203
Vishay Sensortronics 65016

Produits associés

Défiler vers le haut