102EH Célula de carga de doble viga

The ANYLOAD 102EH is a nickel-plated alloy steel double ended beam load cell designed for center-loaded force measurement in silo, tank, and hopper weighing. It is available in 16 rated capacities from 1Klb to 300Klb, with a full scale output of 3.0 mV/V and a tightly controlled zero balance. Nonlinearity, hysteresis, repeatability, and 30-minute creep are all held to within one-tenth of one percent of full scale or better, giving engineers and OEM designers dependable, repeatable performance in vessel weighing systems. The environmentally sealed construction carries an IP67 rating, and every capacity is rated for a 150% safe overload and a 300% breaking overload.

Installation is straightforward, with a full dimensional drawing and tables covering width, height, length, mounting dimensions, and NPT thread sizes (1/4-18 NPT or 1/2-14 NPT depending on capacity), along with approximate weights from 1.7 kg to 50 kg. The datasheet documents the key electrical and environmental specifications, including 700 ohm input and output resistance, 10 V recommended excitation (15 V maximum), a compensated temperature range of -10°C to 50°C (14°F to 122°F), and insulation resistance above 2 GΩ. Standard cable is 5.1 × 10 m on capacities up to 35Klb and 7.6 × 18 m on 50Klb and above, wired to a clear color code: red excitation positive, black excitation negative, green signal positive, white signal negative, and a bare shield. The ANYLOAD 102EHM2 compression weigh module is also available as a mounting solution. With every dimension, specification, and wiring detail in one place, you can design, install, and wire the 102EH without guesswork.

The 102EH is RoHS compliant, CE and Ex (NEPSI) certified, with ATEX, FM, and IECEx approved versions available under the -Ex suffix. The datasheet also includes an interchangeable reference table that cross-references equivalent models from Artech, Coti Global, Rice Lake, Mettler Toledo, Vishay Celtron, Vishay Revere Transducers, and Vishay Sensortronics. This helps dealers, service technicians, and procurement teams quickly find a direct ANYLOAD replacement.

Más información

- +

Características

  • Rated Capacities: 1Klb, 1.5Klb, 2.5Klb, 5Klb, 10Klb, 15Klb, 20Klb, 25Klb, 35Klb, 50Klb, 60Klb, 75Klb,100Klb, 125Klb, 200Klb, 300Klb
  • Material: Acero de aleación
  • Salida a fondo de escala: 3mV/V ± 0,25%
  • Sobrecarga segura: 150%
  • Sobrecarga de rotura: 300%
  • Clasificación IP: IP67
  • Certificado CE, RoHS y Ex(NEPSI)
  • ATEX, FM, IECEx disponibles bajo pedido

Especificaciones

Capacidades nominales 1Klb, 1.5Klb, 2.5Klb, 5Klb, 10Klb, 15Klb, 20Klb, 25Klb, 35Klb, 50Klb, 60Klb, 75Klb, 100Klb, 125Klb, 200Klb, 300Klb
Salida a fondo de escala 3,0mV/V ± 0,25%
Saldo cero ± 0,02mV/V
No linealidad ≤ 125Klb < ± 0.050% // ≥ 200Klb < ± 0.1%
Repetibilidad < ± 0,030%
Error de histéresis ≤ 125Klb < ± 0.030% // ≥ 200Klb < ± 0.1%
Creep en 30 minutos < ± 0,030%
Resistencia de entrada 700Ω ± 10Ω
Resistencia de salida 700Ω ± 5Ω
Excitación recomendada 10 V (15 V máximo)
Resistencia del aislamiento > 2GΩ (50V CC)
Rango de temperatura compensado De -10 °C a 50 °C De 14 °F a 122 °F
Sobrecarga segura 150% del fondo de escala
Romper la sobrecarga 300% del fondo de escala
Tipo de junta Environmentally Sealed
Clasificación IP IP67

Intercambiable

Artech 70510
Coti Global CG-16
Lago Rice RL75016
Lago Rice RL77032
Mettler Toledo SLD425
Vishay Celtron DSR
Transductores Vishay Revere 5203
Vishay Sensortronics 65016

Productos relacionados

Ir arriba