J08EP-E, J08SP-E 정션 박스

ANYLOAD J08EP-E, J08SP-E junction and summing box accepts inputs from multiple load cells and sums up the generated signals into a single output to ensure an accurate multi-cell balance adjustment.  The J08EP-E, J08SP-E is housed in a fiberglass reinforced polyester enclosure purpose-built to prevent condensation and saltwater damage. It is designed to accommodate two to eight parallel load cell connections with an expansion port for wiring additional junction boxes.  The J08EP-E, J08SP-E load cell junction box is easy to install with quick removable load cell connectors and with our captive screw design securing the cover. This model equips with lightning/over voltage protection.

  • Enclosure Material: Fiberglass Reinforced Polyester
  • Number of cells: 2-8 single cells, only an even number of load cells ( eg. 2, 4, 6, 8)
  • Section or individual cell with signal and excitation trim
  • Lightning/Overvoltage Protection
  • Quick removable load cell connectors
  • Switchable On/Off power per channel
  • 독립 전위차계 장착
  • Preinstalled GORE breather vent
  • Conformal coated circuit board
  • Expansion port to/for additional J-Box
  • “No-loss” captive screw design
  • IP 등급: IP67
  • Junction Box Grounding: Connect the external Grounding Stud directly to earth ground for proper surge protection
  • Cable Shielding: Run load cell shield uninterrupted through the junction box. Ground only at the indicator (instrument power ground) to prevent ground loops
셀 수 2-8 single cells
입력 케이블 피팅 M20: 6mm-12mm diameter cable
출력 케이블 피팅 M20: 6mm-12mm diameter cable
트리밍 옵션 Section or Individual cell with Signal Trim Section or Individual cell with Excitation Trim
인클로저 재질 Fiberglass Reinforced Polyester
IP 등급 IP67
로드셀 저항 신호 트림 여기 트림
350Ω 3.6%의 출력 5.4% of output
700Ω 6.3%의 출력 2.7% of output
1000Ω 7.0%의 출력 1.9% of output
맨 위로 스크롤