J04EP-E, J04SP-E 정션 박스

ANYLOAD J04EP-E, J04SP-E junction and summing box accepts inputs from multiple load cells and sums up the generated signals into a single output to ensure an accurate multi-cell balance adjustment.  The J04EP-E, J04SP-E is housed in a fiberglass reinforced polyester enclosure purpose-built to prevent condensation and saltwater damage. It is designed to accommodate two to eight parallel load cell connections with an expansion port for wiring additional junction boxes.  The J04EP-E, J04SP-E load cell junction box is easy to install with quick removable load cell connectors and with our captive screw design securing the cover. This model equips with lightning/over voltage protection.

  • Enclosure Material: Fiberglass Reinforced Polyester
  • Number of cells: 2-4 single cells, only an even number of load cells ( eg. 2, 4)
  • Lightning/Over voltage protection
  • Preinstalled GORE breather vent
  • Conformal coated circuit board
  • Expansion port to/for additional J-Box
  • IP rating: IP67
  • Junction Box Grounding: Connect the external Grounding Stud directly to earth ground for proper surge protection
  • Cable Shielding: Run load cell shield uninterrupted through the junction box. Ground only at the indicator (instrument power ground) to prevent ground loops
셀 수 2-4 single cells
입력 케이블 피팅 M20: 6mm-12mm diameter cable
출력 케이블 피팅 M20: 6mm-12mm diameter cable
트리밍 옵션 Signal trim
트리밍 옵션 Excitation trim
인클로저 재질 Fiberglass Reinforced Polyester
IP 등급 IP67
로드셀 저항 신호 트림 여기 트림
350Ω 3.6%의 출력 5.4% of output
700Ω 6.3%의 출력 2.7% of output
1000Ω 8.0% of output 1.9% of output

또한 좋아할 만한...

맨 위로 스크롤