535TS Amplified Load Pin

The ANYLOAD analog amplified load pin is a force sensor with integrated 0–10 V or 4–20 mA output, designed to replace structural load-bearing pins while providing direct analog feedback to PLC and industrial control systems. It is built for applications where a stable analog signal is preferred over digital bus communication, and where the mechanical pin itself must be engineered to match the host equipment. While offered as a standard product family, most load pins are customized in diameter, length, mounting style, and cable exit to fit the exact machine design.

The integrated amplifier converts the internal strain gauge signal into a scaled voltage or current output compatible with common PLC analog input modules from Siemens, Allen-Bradley (Rockwell), Schneider Electric, Mitsubishi, Omron, and similar platforms. The 4–20 mA version is typically selected for long cable runs and electrically noisy environments, while 0–10 V integrates easily into control panels and machine automation systems. These amplified load pins are widely used in construction equipment, agriculture machinery, lifting systems, cranes, winches, material handling, and industrial controls where force monitoring, overload protection, or closed-loop control is required.

As a load pin is both a structural and sensing element, customization focuses primarily on the mechanical interface: pin diameter, effective shear area, retaining features, cross-drilling, center bore, connector type, and environmental sealing. Electrical output options are standardized around analog formats for straightforward PLC integration, while calibration scaling and cable configuration can be defined per project. This approach ensures the load pin functions as a direct mechanical replacement while delivering reliable analog force measurement for OEM and system integrator applications.

Más información

Contacte con nosotros for more info.

Ficha de datos

Especificaciones
Documentos

Características

Rated capacities: 2t – 100t
Construcción de acero inoxidable para una mayor durabilidad
Environmentally sealed to IP67 for harsh environments
Sobrecarga segura: 150% del fondo de escala
Sobrecarga de rotura: 400% del fondo de escala
Certificación FM/ ATEX/ IECEx opcional

Especificaciones

Capacidades nominales	2t – 100t
Salida a fondo de escala	1.0 mV/V ± 10%
Saldo cero	± 0.02 mV/V
No linealidad	< ± 0.50%
Repetibilidad	< ± 0.30%
Error de histéresis	< ± 0.50%
Creep in 30 min.	< ± 0.20%
Resistencia de entrada	400Ω ± 20
Resistencia de salida	350Ω ± 3
Elemento Material	Acero inoxidable 2Cr13
Excitación recomendada	10 V (15 V máximo)
Resistencia del aislamiento	>2 [50V CC] GΩ
Rango de temperatura compensado	-10°C a 50°C / 14°F a 122°F
Sobrecarga segura	150% del fondo de escala
Romper la sobrecarga	400% del fondo de escala
Tipo de junta / grado IP	Environmentally Sealed / IP67