사양 | A1A-D25C |
---|---|
로드셀 유형 | 모든 스트레인 게이지 유형 |
전원 공급 장치 | 9-24 V DC |
입력 범위 | 0.8~3.9 mV/V |
Output Signal | RS232(A1A-DM2507C)/ RS485(A1A-DM2508C)/ CAN Bus(A1A-DC2508C) |
통신 프로토콜 | Modubus RTU/CANOpen |
해상도 | >1000000 |
Temperature Coefficient | ≤100ppm/°C |
Working Temperature | -22 °F to 122 °F / -30 °C to 50 °C |
Excitation Voltage to Load Cell | 5V |
A1A-D25C 로드셀 디지털 증폭기
ANYLOAD A1A-D25C strain gage amplifiers provide load cell and transducer signal conditioning. The A1A-D25C series strain gage amplifiers are DC-powered amplifiers that can drive 1 load cell connected directly. They can also drive several load cells up to 4 x 350Ω load cells or 8 X 700Ω load cells through a junction box. Housed in an aluminum casting enclosure. The A1A-D25 digitizer module includes both RS232 and RS485 communication interfaces with ModBus protocol.
- One input port, can connect directly to 1 x 350 Ω load cell, or max 4 x 350 Ω (or higher resistance) load cells through a junction box
- 24-bit A/D Converter, high speed processor
- Internal digital filter and strong anti-interference ability
- Contains ability for 9 point linear calibration
- Applied to all kinds of strain gauge bridge-type load cell, such as, tension, compression, torque and so on.
참고: STEP 파일을 열거나 볼 수 있는 소프트웨어가 필요할 수 있습니다.