The ANYLOAD FSP-PTS Floor Scale Pit Frame is designed for high performance in demanding industrial and commercial environments. Engineered with a robust symmetrical grid channel frame and a smooth, corrosion-resistant stainless steel deck plate, the FSP-PTS floor scale provides exceptional durability and hygiene, making it ideal for applications requiring frequent washdowns or exposure to harsh conditions. The FSP-PTS includes ANYLOAD stainless steel load cells, adjustable stainless steel feet, and a built-in junction box for reliable performance. Additional design features include factory-finished corner error adjustments, an integrated level bubble for precise leveling, and threaded eyebolt holes to facilitate easy relocation of the scale within facilities. The FSP-PTS is legal for trade and certified by Measurement Canada for multiple platform sizes and capacities, ensuring reliable and accurate measurements in diverse environments.<\/p>\n
The FSP-PTS is a stainless-steel pit mounting frame designed to seat FSP-SS<\/a> floor scales into floor-level pit installations. Built from 304 stainless steel with a rigid steel channel frame, it allows the scale to be installed flush and level with the surrounding floor, saving space, reducing the risk of damage, and improving workflow efficiency across busy warehouse and logistics environments. The frame is fully compatible with both FSP<\/a> \ubc0f FSP-SS<\/a> floor scale platforms, making it a practical mounting solution for facilities that need a flush, walkable, or drive-over scale installation.<\/p>\n Pit frames like the FSP-PTS are especially useful in distribution centers, warehouses, and material handling facilities where a raised platform scale would create a tripping hazard, obstruct pallet jack and forklift traffic, or interfere with workflow around loading docks. Because the frame is set directly into a poured-concrete foundation, the floor scale sits level with the surrounding floor surface, allowing equipment and personnel to move over it without ramps or transition plates. The stainless steel construction adds corrosion resistance, making the FSP-PTS well suited for facilities that wash down floors, handle moisture-prone materials, or operate in humid or corrosive environments.<\/p>\n The FSP-PTS includes a built-in access hatch, allowing technicians to inspect, service, or troubleshoot the load cells and internal components of the seated floor scale without excavating or removing the frame from the pit. This design reduces long-term maintenance downtime and supports easier calibration and repair work over the life of the installation. The frame is currently offered in a 4×4 platform configuration, with an overall footprint of approximately 1345 x 1512 mm and a height of 120 mm, sized to accept standard FSP<\/a> \ubc0f FSP-SS<\/a> floor scale platforms.<\/p>\n Proper installation of the FSP-PTS requires a poured-concrete pit foundation built according to standard construction practices, ensuring the frame is level, structurally supported, and dimensionally accurate for the scale it will house. If your project requires guidance on pit sizing, concrete foundation specifications, or compatibility with a specific floor scale model, ANYLOAD can assist with installation planning and technical support. We work with facility engineers, contractors, and system integrators to ensure pit frame installations are properly specified for the intended floor scale, load capacity, and site conditions.<\/p>\n<\/p><\/div>\n