The 102MH is a heavy-duty medium-capacity double-ended beam load cell with IP67 water resistance. This model is particularly well-suited to onboard weighing and weighing-in-motion applications.<\/p>","protected":false},"excerpt":{"rendered":"
The ANYLOAD 102MH is a nickel-plated alloy steel double ended beam load cell designed for accurate weight and force measurement. It is rated for a 25t capacity with a full scale output of 2.0 mV\/V and a zero balance of \u00b10.02 mV\/V. Nonlinearity is held below 0.03% of full scale, while repeatability, hysteresis, and 30-minute creep each stay at roughly 0.02% or better. These figures give engineers and OEM designers a stable, dependable sensing element for their weighing systems. The 102MH is sealed to IP67 and withstands a safe overload of 150% and a breaking overload of 300% of full scale.\n<\/p>\n
Installation is straightforward thanks to M20 threaded mounting holes (50 mm \/ 1.97 in deep) and a fully dimensioned drawing with tables in both millimeters and inches. The datasheet documents the 700 \u03a9 input and output resistance, a recommended excitation of 10 V (15 V maximum), and a compensated temperature range of -10\u00b0C to 50\u00b0C (14\u00b0F to 122\u00b0F). The load cell ships with a 6 m cable and a clear color code: red for excitation positive, black for excitation negative, green for signal positive, white for signal negative, and a bare shield wire. Everything needed to specify, wire, and mount the 102MH is in one place, without guesswork.\n<\/p>\n
The 102MH carries RoHS compliance, and ATEX, FM, and IECEx approved versions are available by adding the “-Ex” suffix to the part number (for example, 102MH-25t-Ex). The datasheet also notes that specifications are subject to change without notice, so customers should verify the information at the time of order.<\/p>\n<\/p><\/div>\n