This double-ended shear beam load cell is constructed with heavy-duty alloy steel and welded sealed to provide IP68-class water resistance. The robust, low-profile, and center-supported design is suited for higher-capacity applications, capable of operating under challenging conditions. This load cell is commonly used in truck scales, railroad scales, and is designed to be easily integrated into a wide variety of systems.<\/p>","protected":false},"excerpt":{"rendered":"
The ANYLOAD 102RH-CB is a nickel-plated alloy steel double ended beam load cell designed for accurate weighing and force measurement in multiple-cell systems. The datasheet documents a 75Klb (34.02t) rated capacity with a full scale output of 3.0 mV\/V and a tightly controlled zero balance. Nonlinearity, hysteresis, and 30-minute creep are all held below \u00b10.023%, with repeatability below \u00b10.017%, giving engineers and OEM designers consistent, repeatable performance. The welded seal provides IP68 protection, and the load cell is rated for a safe overload of 150% and a breaking overload of 300% of full scale.\n<\/p>\n
Installation and integration are straightforward. The dimensional drawing and table give the overall length, height, width, and mounting hole dimensions in both millimeters and inches, along with the 1\/2-14 NPT thread detail. The wiring is color coded: red for excitation positive, black for excitation negative, green for signal positive, white for signal negative, and yellow for shield. The datasheet also specifies the 700 \u03a9 input and output resistance, the recommended 10V excitation (15V maximum), insulation resistance, and the -10\u00b0C to 50\u00b0C (14\u00b0F to 122\u00b0F) compensated temperature range. The standard configuration includes a 20ft (6m) rat guard cable with a braided sheath ring terminal and a ground lug, so you can specify, wire, and install the 102RH-CB without guesswork.\n<\/p>\n
The 102RH-CB is RoHS compliant and listed to NTEP 1:10,000 Class IIIL for multiple-cell use and OIML MAA C4 with Y=15,000. ATEX, FM, and IECEx approved versions carry the “-Ex” suffix. The datasheet includes an interchangeability reference to the Vishay Sensortronics 65040A-1158, helping dealers, service technicians, and procurement teams quickly find a direct ANYLOAD replacement.<\/p>\n<\/p><\/div>\n