The 101BH S-beam is a highly versatile load cell with a wide range of capacities. The design offers excellent accuracy and reliability while remaining an affordable weighing solution. This model is OIML C3\/C4.5 and NTEP certified and is interchangeable with Vishay Tedea-Huntleigh 615. The 101BH is ideal for many tension applications, including converting mechanical weighbridges, hopper weighing, and force measurement.<\/p>\n
En\u00a0101BHM2<\/span><\/span><\/a> weigh modules facilitate high accuracy tension loading, including protection against stray currents. Anyload is equipping growth in the force measurement industry with this simple, portable, and reliable load cell, click here to see more force measurement products<\/span><\/span><\/a>.<\/p>","protected":false},"excerpt":{"rendered":" The ANYLOAD 101BH is an alloy steel, nickel-plated S-beam load cell designed for tension and compression force and weight measurement. It is offered in capacities from 50kg to 10t with a rated output of 2.0 mV\/V and a tightly controlled zero balance. Nonlinearity, repeatability, and hysteresis are all held to under two hundredths of a percent of full scale, and 30-minute creep is similarly low, giving engineers and OEM designers dependable accuracy across the range. The environmentally sealed construction is rated IP66 for capacities up to 200 kg and IP67 for 300 kg and above, with a safe overload of 150% and a breaking overload of 300% of full scale.<\/p>\n Installation is straightforward. Threaded mounting sizes from M12 to M30 are matched to capacity, and the datasheet provides dimensional drawings and tables in both millimeters and inches. The standard 3 m cable (5.1 mm diameter) follows a clear color code: red for excitation positive, black for excitation negative, green for signal positive, white for signal negative, and bare for shield. The datasheet also documents input and output resistance, recommended 10 V excitation (15 V maximum), insulation resistance, and the compensated temperature range of -10\u00b0C to 50\u00b0C (14\u00b0F to 122\u00b0F), so you can specify and wire the cell without guesswork.\n<\/p>\n The 101BH carries RoHS compliance and is documented for NTEP Class III and OIML C3 and C4.5 applications, with ATEX, FM, and IECEx approved versions available under the “-Ex” suffix. The built-in interchangeability reference cross-references the Vishay Tedea-Huntleigh model 615, helping dealers, service technicians, and procurement teams find a direct ANYLOAD replacement quickly. The datasheet also points to the 101BHM2 weigh module for complete mounting solutions.<\/p>\n<\/p><\/div>\n