This double-ended shear beam load cell is constructed with heavy-duty alloy steel and welded sealed to provide IP68-class water resistance. The robust, low-profile, and center-supported design is suited for higher-capacity applications, capable of operating under challenging conditions. This load cell is commonly used in truck scales, railroad scales, and is designed to be easily integrated into a wide variety of systems.<\/p>","protected":false},"excerpt":{"rendered":"
The ANYLOAD 102RH is a nickel-plated alloy steel double ended beam load cell designed for accurate weight and force measurement in multiple-cell weighing systems. It is offered in rated capacities of 10t and 15t, plus 50Klb, 65Klb, 75Klb, 100Klb, and 125Klb, with a nominal full scale output of 3.0 mV\/V and a tightly controlled zero balance. Nonlinearity, hysteresis, and creep are held below roughly 0.023 percent, and repeatability below 0.017 percent, giving engineers and OEM designers a stable, repeatable signal. The welded seal carries an IP68 rating, and the cell is protected by a safe overload of 150% and a breaking overload of 300% of full scale.\n<\/p>\n
The datasheet gives a full dimensional drawing and table for each capacity, so mounting and fitment can be planned before ordering. Center-hole and no-center-hole versions are documented, along with approximate weights. Electrical specs include 700 ohm input and output resistance, a recommended excitation of 10V (15V maximum), and a compensated temperature range of -10\u00b0C to 50\u00b0C (14\u00b0F to 122\u00b0F). The cable uses a standard color code: red for excitation positive, black for excitation negative, green for signal positive, white for signal negative, and a bare shield wire. Cable entry is 1\/2-14 NPT. With every dimension, wiring detail, and rating in one place, installation and system integration can proceed without guesswork.\n<\/p>\n
The 102RH meets RoHS requirements. The 50Klb to 125Klb versions are NTEP approved at 1:10,000 Class IIIL for multiple-cell use, and the metric versions are OIML R60 approved at MAA C4 with Y=15,000. ATEX, FM, and IECEx approved versions carry the “-Ex” suffix. An interchangeable reference table cross-references equivalent models from Artech, Coti Global, Rice Lake, Vishay Revere Transducers, and Vishay Sensortronics. It helps dealers, service technicians, and procurement teams find a direct ANYLOAD replacement quickly.<\/p>\n<\/p><\/div>\n