The 563YS is a single-ended beam load cell with stainless steel weld sealed IP68-class water and corrosion resistance. The reliable, low-profile design is easy to install and is interchangeable with VPG, Rice Lake, HBM, and Coti Global models (see: INTERCHANGEABLE tab). Common applications include platform scales, hopper scales, tank scales, and process weighing. This cost-effective product is also frequently used in OEM applications.A compression weigh module 563YSM3-02 is available to facilitate installation for ideal loading, with easy-to-install mounting options, allowance for thermal expansion, and protection from irregular loading and lifting.<\/p>","protected":false},"excerpt":{"rendered":"
The ANYLOAD 563YS is a 17-4PH stainless steel single ended beam load cell designed for precision weighing and force measurement. It covers rated capacities from 500 lb to 20 Klb (250 kg to 10 t) with a 2.0 mV\/V full scale output. Zero balance is tightly controlled, and nonlinearity, repeatability, and hysteresis are all held below roughly 0.023% of full scale, with creep over 30 minutes held below 0.030%. Engineers and OEM designers will find it well suited to platform, tank, hopper, and process weighing applications. The welded seal construction carries an IP68 rating, with safe overload of 150% and breaking overload of 300% of full scale.<\/p>\n
Installation is straightforward, with capacity-specific mounting threads ranging from M12x1.75 to 1-14 UNS-2B, and a dimensional drawing and table giving every length, width, height, and hole dimension in both lb\/inches and kg\/mm. The datasheet also documents the 350 ohm input and output resistance, 10V recommended excitation (15V maximum), and the -10\u00b0C to 50\u00b0C (14\u00b0F to 122\u00b0F) compensated temperature range. A 5.1 mm cable is standard, 6 m for 0.5-10 Klb and 0.25-5 t capacities and 10 m for 15-20 Klb and 10 t. The wiring is color coded: red and black for excitation, green and white for signal, and bare for shield. Everything needed to specify, wire, and mount the load cell is in one place, without guesswork.<\/p>\n
The 563YS is RoHS compliant, with NTEP and OIML class data published for specific capacity ranges, and ATEX, FM, and IECEx approved versions are available with the “-Ex” suffix. An interchangeability table cross-references equivalent models from Artech, Coti Global, HBM, Mettler-Toledo, Rice Lake, Vishay Celtron, Vishay Revere Transducers, Vishay Sensortronics, and Vishay Tedea-Huntleigh. It helps dealers, service technicians, and procurement teams quickly find a direct ANYLOAD replacement.<\/p>\n<\/p><\/div>\n